Home > Dead Weight Tester >

YS Tungsten Carbide Dead Weight Tester For Laboratory

Product Categories

Smart Water Pressure Sensor [132]
Air Pressure Transducer Sensor [79]
Oil Pressure Sensor [68]
Pressure Gauge Calibrator [163]
Stainless Steel Pressure Regulator [90]
Submersible Level Sensor [87]
Dead Weight Tester [62]
Dry Block Temperature Calibrator [58]
Differential Pressure Transmitter [120]
High Temperature Pressure Transducer [45]
Differential Pressure Gauge [84]
Digital Pressure Gauge [243]
Radar Level Meter [45]
Gas Flow Meter [230]
Digital Flow Meter [102]
Water Flow Meter [137]
Wall Mounted Ultrasonic Flow Meter [90]
Tuning Fork Density Meter [68]

Xi'an Yunyi Instrument Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

YS Tungsten Carbide Dead Weight Tester For Laboratory

Ask Lasest Price
Brand Name :	Yunyi
Model Number :	YS series
Certification :	CE
Price :	$845-$932/p
Payment Terms :	L/C, D/A, D/P, T/T, Western Union
Supply Ability :	10pcs/w
Delivery Time :	7 days

Add to Cart

Product Details
Company Profile

YS Tungsten Carbide Dead Weight Tester For Laboratory

Presusre Gauge Calibrator Dead Weigtht Tester Piston Gauge

Description Presusre Gauge Calibrator Dead Weigtht Tester

Deadweight tester (DWT) is a calibration standard which uses a piston cylinder on which a load is placed to make an equilibrium with an

applied pressure underneath the piston.Deadweight testers are so called primary standards which means that the pressure measured by a deadweight tester is defined through other quantities; Length, mass and time.Typically deadweight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.

Parameters Presusre Gauge Calibrator Dead Weigtht Tester

Parameters	unit	Pressure value
Parameters	unit	0.6MPa	6MPa	25MPa	60MPa
upper limit of measurement	MPa	0.6	6	25	60
lower limit of measurement	MPa	0.04	0.1	0.5	1
piston pressure gauge	cm²	1	0.5	0.2	0.1

nominal area
Chassis and piston	Nominal mass	kg	0.4	0.5	1	1
Chassis and piston	pressure generated	MPa	0.04	0.1	0.5	1
Special weight	Nominal mass	kg	0.1；0.5	0.5；2.5	1；5	1；5
	pressure generated	MPa	0.01；0.05	0.1；0.5	0.5；2.5	1；5
	Number	个	6；10	4；11	4；9	4；11
Both ends of the lock nut			M20×1.5	M20×1.5	M20×1.5	M20×1.5
Weight		kg	35	65	85	95
Working liquid			Transformer oil to 20 ℃ Kinematic viscosity 9 ~ 12 centistokes, The acid value of not more than 0.5 mg KOH/ G			Medicinal castor oil to 20 ℃ kinematic viscosity 900 ~ 1100 centistokes, acid value is not greater than 1.6 mg KOH/ G

Purpose Presusre Gauge Calibrator Dead Weigtht Tester
YS-6 Deadweight Tester. Pressure Range 5.8 - 87psi. Accuracy: 0.05% or 0.020% of reading.
YS-60 Deadweight Tester. Pressure Range 14.5 - 870 psi. Accuracy: 0.05% or 0.020% of reading.
YS600 Deadweight Tester. Pressure Range 145 - 8700 psi. Accuracy: 0.05% or 0.020% of reading

Product Tags:


*From:	Your email address is incorrect!
*To:	Xi'an Yunyi Instrument Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!