Home > Dead Weight Tester >

YS-J Dead Weight Tester , 10000Psi Dead Weight Pressure Gauge Calibrator

Product Categories

Xi'an Yunyi Instrument Co., Ltd

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

Name: YSJ Dead Weight Tester 10000Psi Dead Weight Pressure Gauge Calibrator
Brand: YUNYI
Price: 1 USD

Add to Cart

Features
1. The piston and cylinder are made of high strength, high stiffness, and low temperature coefficient of linear expansion of the carbide grinding tungsten carbide material, with a wide range of ambient temperature, stable performance 20 ± 5 ℃.
2. The load center of gravity low, weight by Cradle applied directly to the piston, the piston smooth operation, the pressure fluctuation is extremely small, accurate indication.
3. When pressure more than 25MPa, the medium uses a small viscosity isooctyl sebacate, thus ensuring a very high sensitivity.
4. The weights used are all non-magnetic stainless steel material.
5. The piston displacement sensor used to monitor the working position, the piston up and down stroke of ± 1.5mm, instrument display is sensitive, smart, and accurate.
6. Wide range, at the lower 1MPa, the basic error of ± 0.02% or ± 0.05%, a KY100 type manometer, capable of reaching the upper limit of the current domestic 6,60,100MPa three measuring manometer.
7. Pressure adjustment easy, even at 250MPa pressure could ease.

Applications
Typically dead weight testers are used in calibration laboratories to calibrate pressure transfer standards like electronic pressure measuring devices.

Parameter Calibration Standard:

Item		0.6MPa	6MPa	25MPa	60Mpa	100MPa	160MPa	250MPa
Range	MPa	0.04-0.6	0.1-6	0.5-25	1-60	2-100	2-160	5-250
Up limit of measurement	MPa	0.6	6	25	60	100	160	250
Down limit of measurement	MPa	0.04	0.1	0.5	1	2	2	5
Piston nominal area	cm²	1	0.5	0.1	0.05	0.05	0.05	0.02
Chassis and piston	Nominal mass kg	0.4	0.5	0.5	0.5	1	1	1.25
Chassis and piston	Generatedpressure MPa	0.04	0.1	0.5	1	2	2	5
Special weight	Nominal mass kg	0.1;0.5	0.5;2.5	0.5;2.5	0.5;2.5	0.5;1;2;5	0.5;1;2;5	1.25;2.5;5
	Generatedpressure MPa	0.01;0.05	0.1;0.5	0.5；2.5	1;5	1;2;4;10	1;2;4;10	5;10;20
	Number	6;10	4；11	4；9	4;11	1;2;1;9	1;2;1;9	1;2;11
Both ends of the lock nut		M20×1.5	M20×1.5	M20×1.5	M20×1.5	M20×1.5	M20×1.5	M20×1.5
Weight	kg	35	60	55	90	85	110	140
Working liquid	25#Transformer oil and aviation kerosene mixed (4.39:1).20 ℃ Kinematic viscosity 9 ~ 12 centistokes, The acid value of less than 0.05 mg KOH/ G				sebacate 20 ℃ kinematic viscosity 20-25 centistokes, acid value is not greater than 0.05 mg KOH/ G
Working liquid

Ordering Information:

Product Tags:

JY-60 Dead Weight Tester

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Xi'an Yunyi Instrument Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Dead Weight Tester products from this supplier

Find Similar Products By Category:

Measurement & Analysis Instruments

Hot Searches: