Description Clean room Micro differential pressure gauge Air
pressure gauge
Tair Micro differential pressure gauge manometer used to measure
fan and blower pressure, filter resistance, wind speed, furnace
pressure, orifice plate differential pressure, bubbles water level
and liquid amplifier or hydraulic system pressure. It using
frictionless magnetic components, can rapidly measure the
micro-pressure air or non-corrosive gases, including positive,
negative (vacuum) or differential. No wear, hysteresis and
clearance. Not filling, vaporization and freezing. This design has
anti-vibration, anti-shake and high overpressure capability, you
can guarantee access to high precision. The design impact, shock
and overload protection.
Detailed Images Clean room Micro differential pressure gauge Air pressure gauge
Application Clean room Micro differential pressure gauge Air pressure gauge
For high accuracy-graranteed within 2% of full scale. indicate low
air or non-corrosive gas pressures –eighter positive,
negative(vacuum)of differential. The design resists shock
,vibration and over-pressures no Manometer fluid to evaporate,
freeze or cause toxic or leveling problems, it’s inexpensive too .
Specifications Clean room Micro differential pressure gauge Air pressure gauge
| Name: | Micro differential pressure gauge for gas,air |
| Gauge Size | 4"dia. x 2-3/16"deep. |
| Accuracy | ±2% of Full scale ( ± 3% on 0,-100Pa,-125Pa,100mm and ± 4% on
-00,-60pa,-6mm ranges) |
| Range available | -20 inHg to 15 psig, (-0.677 bar to 1.034 bar) |
| Over pressure | Relief Plug opens at approximately 25psig(1.72bar) standard gauges
only |
| Temperature Limits | 20- 140 °F(-6.67 to 60°C) |
FAQ
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market
test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the
prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and
10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished
goods) + good warranty service(1 year free to change a new one
without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And
before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure
for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional
R&D dept which can provide professional solutions for you.
