Mini air differential pressure gauge for measuring fan&blower
fil gas medical equipment
Mini air differential pressure gauge used to measure fan and blower
pressure, filter resistance, wind speed, furnace pressure, orifice
plate differential pressure, bubbles water level and liquid
amplifier or hydraulic system pressure. It using frictionless
magnetic components, can rapidly measure the micro-pressure air or
non-corrosive gases, including positive, negative (vacuum) or
differential. No wear, hysteresis and clearance. Not filling,
vaporization and freezing. This design has anti-vibration,
anti-shake and high overpressure capability, you can guarantee
access to high precision. The design impact, shock and overload
protection.
specification Mini air differential pressure gauge for measuring
fan&blower fil gas medical equipment
| Medium | air and non-combustible, compatible gases (optional gas) |
| Housing | cast aluminum housing or ABS shell, glass beveled panels. Dark gray
coating, can withstand 168 hours salt spray test |
| Accuracy | 2% FS (mm units, and the range with the corresponding pa) |
| Pressure range | -20Hg To 15 psig (-0.677 bar to 1.034 bar) |
| Temperature range | 20 to 140 ° F (-6.67 to 60 ° C) |
| Hole size | 114mm |
| Mounting Orientation | Diaphragm in vertical |
| Connections | same 1/8 "NPT high and low pressure fittings, one pair on the side,
one pair in the back |
| Weight | 500g / only |
| Standard accessories | two 1/8 "NPT threaded connectors for high and low pressure fittings
can be connected with a rubber tube; two 1/8" NPT plug for blocking
the remaining two high and low pressure ports; three a threaded
countersunk mounting coupling (mounting ring, according to buckle
holder for three interfaces to replace MP and count on attachments
HP). |
1. Medium: air and non-combustible, compatible gases (optional gas)
2. Housing: cast aluminum housing or ABS shell, glass beveled
panels. Dark gray coating, can withstand 168 hours salt spray test
3. Accuracy: 2% FS (mm units, and the range with the corresponding
pa)
4. Pressure range:. -20Hg To 15 psig (-0.677 bar to 1.034 bar)
5. Temperature range: 20 to 140 ° F (-6.67 to 60 ° C)
7. Mounting Orientation: Diaphragm in vertical
8. Connections: same 1/8 "NPT high and low pressure fittings, one
pair on the side, one pair in the back
9. Weight: 500g / only
10. Standard accessories: two 1/8 "NPT threaded connectors for high
and low pressure fittings can be connected with a rubber tube; two
1/8" NPT plug for blocking the remaining two high and low pressure
ports; three a threaded countersunk mounting coupling (mounting
ring, according to buckle holder for three interfaces to replace MP
and count on attachments HP)
