Hydraulic E61 Manometer 4 digits LCD display digital Engine Fuel
Pressure Gauge
Description 4 digits LCD display digital pressure gauge
The digital pressure gauge is mainly composed of a housing, a
pressure sensor and a signal processing circuit, and has the
advantages of high precision, good corrosion resistance, impact
resistance, shock resistance, small temperature drift, and good
stability; the micro power processor can be used to continuously
Use time.
Detailed picture of 4 digits LCD display digital pressure gauge
Specification of 4 digits LCD display digital pressure gauge
| Measurement range | -0.1 to 100mpa (selected in range) |
| Display accuracy | 0.1 ,0.2 ,0.25,0.4 ,0.5 |
| Display mode | up to 5 dynamic pressure display |
| Overload pressure | 1.5 times full |
| Power Supply | Two AAA 7 batteries (3V) |
| Measuring medium | water, gas, etc. compatible with stainless steel |
| Medium temperature | -20~80°C |
| Working temperature | -10~60°C |
| Operating Humidity | ≤80%RH |
| Mounting thread | M20X1.5 (others can be customized) |
| Pressure type | gauge/absolute pressure |
| Response time | ≤50ms |
Features 4 digits LCD display digital pressure gauge
1.Visual display the bar charts of pressure percentage
2.Can realize the self calibration correction
3.Acquisition speed can be set to (0.3~10) s/time
4.The battery life of up to 5 years
5.The technology of signal isolation and Anti electromagnetic and
Radio frequency interference
6.Zero self stabilization technology, temperature compensation
technology
Model selection 4 digits LCD display digital pressure
gauge
| MOdel | YK-80 |
| Pressure range | 1: -100KPa~0 |
| 2: 0-60MPa |
| 3: 0-100MPa |
| Accuracy | A1: 0.5%FS |
| A2: 0.25%FS |
| A3: 0.1%S |
| A4: 0.05%FS |
| Thread size | T1: M20*1.5 |
| T2: 1/4NPT |
| T3: 1/2NPY |
| T4: cusomize |
| Power supply | P1: AAA battery |
| P2: 24VDC |
| Optional | O1: USB |
| O1: RS485 |
Related Products 4 digits LCD display digital pressure gauge
Usage notes of 4 digits LCD display digital pressure gauge
1.Clear it before use. Due to the difference in atmospheric
pressure and stress after installation, the product may show a
little pressure. Please clear it and use it again (make sure the
meter is not under pressure when it is cleared).
2.Do not spy on the sensor. This product has a built-in pressure
sensor, which is a precision device. Please do not disassemble it
yourself. You can't use a hard object to probe or touch the
diaphragm to avoid damaging the sensor.
3.Use a wrench to install. Before installing the product, make sure
that the interface threads match the gauge threads and use a hex
wrench; do not rotate the case directly.
FAQ
Q:How long will you reply me?
A:We will contact you as soon as possible but within 12 hours
Q: Can I get some samples?
A: Yes, Sample order is available for quality check and market
test. But you have to pay the express cost.
Q: How soon can you arrange your production?
A: Once getting your product confirmation and receiving the
prepayment, the production will be started immediately.
Q: What's delivery time?
A: It usually takes about 3-5 working days for small order and
10-15 days for big order.
Q:How do you control your quality ?
A: Three inspection steps(of original, production, and finished
goods) + good warranty service(1 year free to change a new one
without any human damage factors).
Q: What certificates do you have ?
A:ISO9000, CE, Explosion-proof certification, RoHs ready. And
before the delievry of goods, quality and safety inspection
certification issued by third parts also can be offered.
Q:Could I visit your factory?
A:Very welcome! Fly to Xian Yang air port. It was a big pleasure
for us.
Q: What's your warranty terms?
A: We offer 12 months warranty time.
Q:can you provide OEM & Customized service?
A:Yes, OEM and ODM are both available, we have the professional
R&D dept which can provide professional solutions for you.
Company Information
