Sewage Magnetic Flowmeter Magnetic Water Flow Meter With Stainless
Steel Material
The sewage magnetic flowmeter, constructed with stainless steel
material, consists of two essential components: the sensor and the
converter. It operates on the principles of Faraday's law of
electromagnetic induction. This flowmeter is specifically designed
for accurately measuring the volume flow of conductive liquids with
a conductivity greater than 5μS/cm. It is highly suitable for
applications where the flow medium is composed of conductive
substances.
The magnetic water flow meter functions as an induction meter,
allowing for precise measurement of the volume flow of conductive
media. It offers reliable measurement capabilities not only for
general conductive liquids but also for highly corrosive substances
such as strong acids and alkalis. Additionally, it is capable of
accurately measuring the volume flow of liquid-solid two-phase
suspensions, including mud, mineral pulp, and paper pulp.
The stainless steel construction of this water flow meter ensures
durability and resistance to corrosion, making it suitable for
sewage and wastewater applications. It provides accurate and
reliable flow measurements in challenging environments.
Overall, the sewage magnetic flowmeter with stainless steel
material is an ideal choice for monitoring and measuring the flow
of conductive liquids, including corrosive substances and
liquid-solid suspensions typically found in sewage and wastewater
systems.
Specification of Sewage Magnetic Flowmeter Magnetic Water Flow
Meter With Stainless Steel Material
Item | Sewage Magnetic Flowmeter Magnetic Water Flow Meter With Stainless
Steel Material |
Item | magnetic water flow meter |
Size(mm) | DN15mm---DN3200mm |
Medium | common water, Conductive liquid, slurry |
Medium Temperature | Chloroprene Rubber:-10-60℃: PTFE:-10-120℃ |
Installation Type | Flange connection, Insert type, sanitary clamp type, thread
connection. |
Lining | Chloroprene Rubber,PTFE, Polyurethane ,fluororesin-46 |
Electrode material | 316L,HC,HB,Titanium,Tantalum,Platiniridium |
Grade of Accuracy | 0.2%FS, 0.5%FS |
Flow Velocity | ≤15m/s |
Rated pressure | 1.0MPa, 1.6MPa, 2.5MPa, 4MPa |
Cable Interface | M20*1.5 or G1/2 Female Thread etc. |
Sealed | head IP65, body IP68 |
Output Signal | 4-20mA Current output or Pulse output |
Communication | RS485 Protocol Modbus protocol |
Power Supply | 220VAC, 24VDC, battery |
| The instantaneous flow and cumulative flow |
Feature of Sewage Magnetic Flowmeter Magnetic Water Flow Meter With
Stainless Steel Material
High precision, generally up to ±1%R, ±0.5%R, high-precision type
up to ±0.2%R;
Good repeatabilit, short-term repeatability can reach 0.05%~0.2%.
Output pulse frequency signal, suitable for total measurement and
connection with computer, no zero drift, strong anti-interference
ability;
High frequency signal (3~4kHz) can be obtained, and the signal
resolution is strong;
Wide range, medium and large diameters can reach 1:20, and small
diameters are 1:10;
Suitable for high-pressure measurement, no holes are required on
the meter body, and it is easy to make a high-pressure meter;
Application of Sewage Magnetic Flowmeter Magnetic Water Flow Meter
With Stainless Steel Material
The magentic water flow meter is widely used in the flow
measurement of petroleum, chemical, metallurgy, textile, paper,
environmental protection, food and other industrial sectors and
municipal management, water conservancy construction, river
dredging and other fields.
Company of Sewage Magnetic Flowmeter Magnetic Water Flow Meter With
Stainless Steel Material
Detaild picture of Sewage Magnetic Flowmeter Magnetic Water Flow
Meter With Stainless Steel Material
